Staple Geotextile Effective In Preventing Pollutant Spread In Environmental Projects
Product Introduction
Staple fiber geotextile is a kind of geosynthetic material made by non-woven production equipment with short fiber as raw material, and has good filtration performance.
Product Properties
1. Filterability: Staple fiber geotextiles have good filtration performance, which can prevent the loss of fine soil particles while allowing the flow of water. When the water flows from the fine soil layer into the coarse soil layer, the staple fiber geotextile can effectively intercept the soil particles, fine sand, small stone, etc., and maintain the stability of soil and water engineering.
2. Water permeability: The staple fiber geotextile has high water permeability and can maintain good water permeability even under the pressure of soil and water.
3. Corrosion resistance: staple fiber geotextile with polypropylene or polyester and other chemical fiber as raw materials, acid and alkali resistance, no corrosion, no moth, anti-oxidation.
4. Durability: Staple fiber geotextile has high tensile strength and deformation resistance, which can enhance the stability of soil.
5. Easy construction: short fiber geotextile light weight, easy to use, simple construction.
Product Application
1. Water conservancy projects: In reservoirs, DAMS, canals and other projects, staple fiber geotextiles are used for reinforcement and filtration.
2. Road construction: improve the bearing capacity and stability of the roadbed, extend the service life of the road.
3. Environmental engineering: Prevent the spread of pollutants in landfills, sewage treatment plants and other projects.
4. Slope engineering: Used for slope protection to prevent soil erosion and landslides.
Product Specification
* Grams/㎡: 100g~800g/㎡
* Width:2m~6m
* Roll length:50m~100m
PS: Customized request accept for all above.
Product Specification and Technical Index (GB/T 17638—2017)
| Item |
Nominal Breaking Strength(KN/m) |
| 3 |
5 |
8 |
10 |
15 |
20 |
25 |
30 |
40 |
| 1 |
Breaking Strength (KN/m,≥,LD/TD) |
3.0 |
5.0 |
8.0 |
10.0 |
15.0 |
20.0 |
25.0 |
30.0 |
40.0 |
| 2 |
Elongation Rate (%,≥,LD/TD) |
20~100 |
| 3 |
Bursting Strength(KN)≥ |
0.6 |
1.0 |
1.4 |
1.8 |
2.5 |
3.2 |
4.0 |
5.5 |
7.0 |
| 4 |
Mass Deviation Rate Per Unit Area(%) |
±5 |
| 5 |
Width Variation ( ％) |
-0.5 |
| 6 |
Thickness Deviation Rate(%) |
±10 |
| 7 |
Sieve Size O90,O95 (mm) |
0.07~0.20 |
| 8 |
Vertical Permeability Coefficient (cm/s) |
Kx(10ˉ1-10ˉ3) K=1.0-9.9 |
| 9 |
Tearing Strength (KN,≥,MD/CD) |
0.10 |
0.15 |
0.20 |
0.25 |
0.40 |
0.50 |
0.65 |
0.80 |
1.00 |
| 10 |
Acid And Alkali Resistance (Strength Retention Rate)/%≥ |
80 |
| 11 |
Antioxidant Performance (Strength Retention Rate)/%≥ |
80 |
| 12 |
UV Resistance(Strength Retention Rate)/%≥ |
80 |
(GB/T17638-1998)
| Specification |
F100 |
F150 |
F200 |
F250 |
F300 |
F350 |
F400 |
F450 |
F500 |
F600 |
800 |
Remark |
| Item |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
600 |
800 |
| Weight Variation (%) |
-8 |
-8 |
-8 |
-8 |
-7 |
-7 |
-7 |
-7 |
-6 |
-6 |
-6 |
- |
| Thickness (mm≥) |
0.90 |
1.20 |
1.70 |
2.10 |
2.40 |
2.70 |
3.00 |
3.20 |
3.60 |
4.10 |
5.00 |
|
| Width Variation ( ％) |
-0.50 |
| Breaking Strength (KN/m,≥,LD/TD) |
2.50 |
4.50 |
6.50 |
8.00 |
9.50 |
11.00 |
12.50 |
14.00 |
16.00 |
19.00 |
25.00 |
|
| Elongation Rate (%,≥,LD/TD) |
25-100 |
| CBR Burst Strength ( KN≥) |
0.30 |
0.60 |
0.90 |
1.20 |
1.50 |
1.80 |
2.10 |
2.40 |
2.70 |
3.20 |
4.00 |
|
| Sieve Size O90,O95 (mm) |
0.07-0.2 |
|
| Vertical Permeability Coefficient (cm/s) |
Kx(10ˉ1-10ˉ3) |
K=1.0-9.9 |
| Tearing Strength (KN,≥,MD/CD) |
0.08 |
0.12 |
0.16 |
0.20 |
0.24 |
0.28 |
0.33 |
0.38 |
0.42 |
0.46 |
0.60 |
|
1) Specifications according to the mass per unit area, the actual specification between adjacent specifications in the table,
according to the interpolation method to calculate the corresponding assessment index, if beyond the scope in the table,
shall be determined between supplier and the demander.
2) Unit Weight standards according to the design or agreement.
3) Width as reference indexes for internal control of production, the appraisal based on the actual design value if user raised
requests. |
Product Tags:
|
|
Separation Staple Fiber Geotextile 2m~6m Width Preventing Pollution Spread Images
|
