Weather Resistant HDPE Smooth Geomembrane For Various Applications
Product Introduction
Smooth geomembrane, also known as smooth geomembrane, is a widely used waterproof barrier geosynthetic material. The material is based on high polymer, with extremely low permeability, excellent chemical resistance and ultraviolet resistance, and has a high cost performance. The smooth geomemofilm uses high quality primary high density polyethylene (HDPE) as the impermeable substrate. Carbon black, antioxidant, anti-aging agent, ultraviolet absorber and color masterbatch are added in the production process. It is prepared by three layer co-extrusion blow molding technology.
Product Properties
The smooth geomembrane has the advantages of high impermeability, high tensile strength, good flexibility, flexibility and so on. It can adapt to the geological uneven settlement, and has excellent chemical corrosion resistance and weather resistance. In addition, the smooth geomembrane also has good heat resistance and cold resistance. It also has resistance to ultraviolet radiation and good anti-aging properties, suitable for long-term use.
Product Application
Smooth geomembrane has been widely used in many fields because of its unique properties. For example, in water conservancy projects, it can be used for anti-seepage treatment of river dikes, lake DAMS, tailings DAMS, etc. In municipal engineering, it can be used for anti-seepage lining of subway and underground engineering of buildings. In addition, it is also suitable for aquaculture, landscape engineering, salt industry, transportation infrastructure, petrochemical industry and mining engineering and other fields.
Product Specification
* Thickness(mm): 0.30mm~3.00mm
* Width:1m~9m
* Roll length: 30m~100m (customized request accept)
PS: Customized request accept for all above.
Geomembrane Series
Smooth HDPE Geomembrane For Landfill (GH-2S & GB/T 17643-2011)
| Specification |
0.75mm |
1.00mm |
1.25mm |
1.50mm |
2.00mm |
2.50mm |
3.00mm |
Remark |
| Item |
| Thickness (mm) |
0.75mm |
1.00mm |
1.25mm |
1.50mm |
2.00mm |
2.50mm |
3.00mm |
|
| Density (g/c㎡,≥) |
0.939 |
|
| Tensile Properties |
| Yield Strength (N/mm,LD/TD) |
11 |
15 |
18 |
22 |
29 |
37 |
44 |
|
| Breaking Strength (N/mm,LD/TD) |
20 |
27 |
33 |
40 |
53 |
67 |
80 |
|
| Yeild Elongation Rate (%) |
12 |
|
| Breaking Elongation Rate (%) |
700 |
|
| Rectangular Tear Strength (N) |
93 |
125 |
156 |
187 |
249 |
311 |
374 |
|
| Puncture Strength (N) |
240 |
320 |
400 |
480 |
640 |
800 |
960 |
|
Environmental Stress Crack Resistance (h)
(A single point of incision constant tensile method) |
300 |
|
| Carbon Black |
| Carbon Black Content(Rang) (%) |
2.0~3.0 |
|
| Carbon Black Dispersion |
Nine of 10 observation area should be grade 1 or grade 2, not more than 1 of grade3 |
|
| Oxidative Induction Time (OIT) |
| Standard OIT (min) |
100 |
|
| High Pressure OIT (min) |
400 |
|
| 85℃ Oven Ageing (Minimum Average) |
| 90 days after baking, the standard OIT retention(%) |
55 |
|
| 90 days after baking, the hight pressure OIT retention(%) |
80 |
|
| The Anti-UV Strength |
| Ultraviolet irradiation after 1600 hours, the standard OIT retention(%) |
50 |
|
| Ultraviolet irradiation after 1600 hours, the high pressure OIT retention(%) |
50 |
|
| -70℃ The Low Temperature Embrittlement Performance mpact |
Pass |
|
| Water Vapor Penetration Coefficient g.cm (cm2.s.Pa) |
≤1.0X10-13 |
|
| Dimensional Stability |
±2 |
|
Product Specification and Technical Index (GH-1 & GB/T 17643-2011)
Specification
Item |
0.30 |
0.50 |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
Remark |
| Thickness (mm) |
0.30 |
0.50 |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
|
| Density (g/c㎡,≥) |
0.94 |
| Tensile Yield Strength (N/mm, ≥,LD/TD) |
4 |
7 |
10 |
13 |
16 |
20 |
26 |
33 |
40 |
|
| Tensile Breaking Strength (N/mm, ≥,LD/TD) |
6 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
60 |
|
| Yield Elongation Rate (%,≥,LD/TD) |
- |
- |
- |
11 |
|
| Breaking Elongation Rate (%,≥,LD/TD) |
600 |
|
| Rectangular Tear Load (N,≥,LD/TD) |
34 |
56 |
84 |
115 |
140 |
170 |
225 |
280 |
340 |
|
| Puncture Strength (N,≥) |
72 |
120 |
180 |
240 |
300 |
360 |
480 |
600 |
720 |
|
| Carbon Black Content (%) |
2.0~3.0 |
|
| Carbon Black Dispersion |
Less than 1date of Grade 3 out of 10 data, grade 4,grade 5 is not allowed |
|
Product Tags:
|
|
Weather Resistant HDPE Smooth Geomembrane For Mining Landfill Images
|
